Specialist Land Management Machinery Picture of Millcreek Spin Groomer Millcreek Manufacturing Co.
T. 01652 679000 E. info@millcreek.co.uk
Picture of Millcreek Spin Groomer
in association with QuadConnection
 
Millcreek Spin Groomer™
 

Picture of Millcreek Spin GroomerThere are many different types of riding arena grader on the market today, but only the Millcreek Spin Groomer™ can actually loosen and shift material ‘sideways’ to achieve a unique levelling performance. Simply attach it to your compact tractor three point linkage (20hp minimum, no PTO required), drop it into position, and let the Spin Groomer™ do the rest.

Once you have preset the desired ‘angle of attack’ for your surface conditions, and lowered to the desired level of penetration, as you move forward the Spin Groomer™ rotates and performs an unrivalled grooming action. The end result, a surface that is both levelled and loosened, to provide an ideal and safe equine footing.

Shifting sands!

Picture of Millcreek Spin Groomer behind tractorMost graders just drag the riding surface material in a straight line, which seldom manages to move the material evenly between the high and low spots like the Spin Groomer™ can. Additionally, traditional graders just sit on the surface, whereas the Spin Groomer™ can be easily adjusted with your tractors three point linkage to give varying degrees of penetration and severity of grading, especially important on a hard packed arena surface. The optional Rake attachment smoothes the surface behind the more aggressive action of the Spin Groomer™ to leave an even finer finish. The Spin Groomer™ is ideal for use on pure sand, as well as on sand with rubber or PVC mix surfaces.

Size matters!

The Spin Groomer™ is available in three sizes to suit a wide range of compact tractor models:

Spin Groomer sizes

1.5m (5ft) diameter. (20hp requirement).

1.8m (6ft) diameter. (25hp requirement).

2.1m (7ft) diameter. (30hp requirement).

 

Bolt on TinesFor the best results, select the size, which is a minimum of 30cm (1ft) wider than your tractor. The Rake option is adjustable to suit all Spin Groomer™ sizes. The Spin Groomer™ main hub is supported by a heavy-duty bearing that is factory grease packed, and should not require attention during normal life. The bolt-on tines are hardened steel for a longwearing life, but are easily replaceable for service. Millcreek Spin Groomers™ prices start from £995 (including VAT).

For further information and detailed pricing, please call us on (01652) 679000.

 
     
   
 

 

 
 
Copyright © 2005 QUADconnection All Rights Reserved.
Website Design by newmediachoice.
This site is best viewed in IE V.4 or above at a minimum screen resolution of 800x600.
 
     
E. info@millcreek.co.uk